Close Navigation

Search

New style COSHH hazard labeling

Insight by

amanda

Amanda Lambert

Published on

1 July 2015

COSHH

New style COSHH hazard labeling

From this month, another phase of the EU Classification Labelling and Packaging of Substances and Mixtures Regulation (CLP) starts. All chemicals created from June must be packaged with the new red diamond cautioning signs Outlined on the accompanying pages.

For chemical blends, which will be the normal shape in which chemicals land at most working environments, new creation runs should likewise bear the CLP labels, however suppliers are permitted to exhaust existing stocks with the old hazard notices in orange squares until 2017.

Numerous manufactures have acquired the due dates and started utilizing the new labels in 2010 when all new load of single substances needed to start conveying the CLP labels — which bring Europe in line with the United Nations’ globally harmonised system for classifying and labelling chemicals.

The new framework, which likewise influences safety data sheets (SDSs) and different parts of chemicals hazard labelling, holds a significant number of the pictograms used to to signal types of hazard in the old system which followed the Chemicals (Hazard Information and Packaging for Supply) Regulations 2009 (CHIP, or all the more correctly, CHIP 4). These regulations have additionally been withdrawn for the current month.

An expression of caution

The new signs may be accompanied by one of two qualifiers:

Danger: for the most hazardous substances and mixtures

Warning: for less serious hazards.

“One new sign and pictogram is that for ‘Contains gases under pressure’ — the gas cylinder image resembles a wine bottle or cricket bat. This is a new category under CLP”

Beside the hazard diamond and pictogram and under the qualifying word, many CLP labels carry hazard statements, which replace the old risk phrases. So for respiratory sensitises, such as isocyanates or platinum salts, the statement “May cause allergy or asthma symptoms or breathing difficulties if inhaled” replaces the briefer but more technical phrase “May cause sensitisation by inhalation”.

Instead of old safety phrases, labels should now carry one or more of a prescribed set of precautionary statements.

These phrases are divided into three categories:

  • General: “if medical advice is needed, have product container or label at hand” “keep out of reach of children” and “read label before use”.
  • Prevention: “Keep container tightly closed” and “Use only outdoors or in a well ventilated area”.
  • Response: examples include “get medical advice/attention if you feel unwell” or “Fight fire remotely due to the risk of explosion”.

CPL specific

One new sign and pictogram is that for “Contains gases under pressure” – the gas cylinder image, resembling a wine bottle or a cricket bat. This is a new category under CPL with four sub-groups for compressed, liquefied, refrigerated liquefied and dissolved gases.

The first three of these have their own hazard statement: “Contains gas under pressure; may explode if heated. “Refrigerated liquefied gases are associated with the phrase “contains refrigerated gas: may cause cryogenic burns or injury”.

Another new symbol, showing a human torso fractured from the inside indicates the chemical may cause long term health effects and applies to carcinogens and mutagens, respiratory sensitises and substances that are toxic for specific organs or can affect the human reproductive system.

The pictogram replaces the former skull and crossbones for the most serious long term hazards, such as those posed by lead or chrome oxides.

For less serious health hazards, including irritants and skin senitisers, the old “X” symbol is replaced by the new “health effects” exclamation mark pictogram.

Acute toxicity, where chemicals could harm a worker after single exposure or multiple exposures in a few hours, will still be represented by a skull and crossbones in CLP’s new diamond configuration accompanied by the word “Danger”.

The CLP symbol for corrosive substances is essentially the same as the previous one, showing test tubes dropping the substance onto a hand or flat surface.

Review our COSHH assessments pack below.

General COSHH Assessments Pack

Physical agents

Explosive materials also retain a similar pictogram under CPL labelling, with a spherical object bursting apart. The two former risk phrases for risk or extreme risk of explosion “by shock, friction, fire or other sources of ignition” are replaced by seven hazard statements that should appear on labels, from “Unstable explosives” to “may mass explode in fire”.

Flammable gases, aerosols, liquids and solids have a similar pictogram to before – though the new version looks a little more like a stylised leaf – but is now accompanied by “Danger” for extremely flammable substances and “Warning” for less hazardous ones.

The symbol for oxidising liquids and solids, which give off oxygen easily and can accelerate combustion of other materials, remains a ring with a flame on top and will be accompanied by “Danger” for strong oxidises that can cause explosions and “warning” for weaker ones.

The final pictogram in the CLP classification is the lone symbol for environmental hazards, sharing the dead fish and blasted tree image of its predecessor. This symbol and its five accompanying hazard statements cover toxicity to the aquatic environment. Where the old orange symbol was also applied to chemicals that could damage the ozone layer, these will now be labelled with the exclamation mark pictogram and the signal word “warning”.

Full details of the new pictograms, their associated hazard classifications and statements and examples of how these are represented on SDSs can be found in the European commission guide chemicals at work – a New Labelling System, available at OSHA legislation guidelines exposure chemical agents

Before you go review our COSHH assessments pack below.

General COSHH Assessments Pack

Where Do You Rank In The Health & Safety Top 500 Leaderboard?

Insight by

amanda

Amanda Lambert

Published on

23 June 2015

Health and safety blog

HS top 500

 

Where Do You Rank In The Health & Safety Top 500 Leaderboard?

The Health and Safety Industry Top 500 Leaderboard is curated and managed by David Cant @DavidGCant, and published by Veritas Consulting Safety Services Ltd, in association with PPE.org@PPEORG

The Leaderboard shows rankings in an association table-design for the Top 500 people, organizations and association worldwide in industry related parts. This leaderboard perceives the Top 500 dynamic Twitter users included in the Health and Safety Industry, working in Asbestos, Training, E-learning, PPE Suppliers, Safety Equipment, Road Safety, Environment and some more!

This time last year we ranked #217 in the Health & Safety Top 500 Leaderboard. With this in mind we are very proud to announce that we have jumped 138 places over the year and now rank #79. Over the past month alone we are up by 23 places from #102 and are hoping to continue to climb the ladder.

Rankings are in light of Social Media associations and impact over all online networking channels, for example, Google, Facebook and Linkedin, with the information measured by Klout. Rankings can go “Up or Down” contingent upon Social Media action in this way.

Where do you rank?
On the off chance that you are not on this Leaderboard and in the Health and Safety industry yourself or might want to designate somebody who ought to be incorporated tweet @DavidGCant the details with #HSTop500 and David will add you to the LeaderBoard to see where you Rank.

Are you ensuring your employees safety?

Insight by

amanda

Amanda Lambert

Published on

9 June 2015

Health and safety news

Are you ensuring your employees safety?

Your employees safety is key to your business success. Failure to keep your employees safe can be expensive.

The general public is now savvy when it comes to health safety at work. For example, the general public will video, take images and send the footage to the HSE as they did in the case below.

Many small businesses sail close to the wind with regard to health and safety, but they don’t have to; with some essential support, we can ensure you run your business safely.

Director responsibilities

As a director, your first job should be to review your company’s health and safety policy document and ensure you are happy with it.

Legislation that covers the responsibilities of a director

  • The Health and Safety at Work, etc Act 1974
  • The Management of Health and Safety at Work Regulations 1999
  • Corporate Manslaughter and Corporate Homicide Act 2007

Learn more about directors’ health and safety responsibilities.

Employees safety case study

Tyldesley-based firm IQ Roofing Solutions was prosecuted after a member of the public snapped the worker on the roof.

A Health and Safety Executive (HSE) inspector visited in the site the same day on June 6 last year and issued a prohibition notice, ordering the staff to come down until scaffolding or other safety measures had been introduced.

Boss Stuart Bell, managing director of the firm, had been at the site earlier that day and knew work would be carried out without scaffolding, a court heard.

The firm, of Nelson Street in Tyldesley, had previously been served with a prohibition notice in 2011 following unsafe working practices.

Trafford Magistrates Court heard that IQ Roofing Solutions was unable to provide proof that it held employers’ liability insurance — a legal requirement — which allows workers to claim compensation if they are injured at work.

The business pleaded guilty to two breaches of work-at-height regulations and to a breach of the Employers’ Liability Act.

The company was fined £3,000 and ordered to pay £2,000 court costs.
A fine of £1,000 was issued to Mr Bell along with £1,619 prosecution costs after he admitted two breaches of the work-at-height regulations.

Laura Moran, HSE Inspector, said: “Falls from height are responsible for about a third of workplace deaths every year, with 25 people losing their lives in 2012 and 2013 alone.

“I’d therefore like to thank the member of the public who alerted us to the work, as they may well have prevented a serious injury.

“Both IQ Roofing Solutions and Stuart Bell put workers’ lives in danger by allowing them onto a slippery roof without safety measures in place. This meant that workers could have been badly injured if they had slipped and fallen to the ground below.

“If workers had been injured, then they may not have been able to claim compensation as the firm also failed to provide us with any proof that it had employers’ liability insurance.” Employees safety is paramount to our work at HSE.

Competent safety advisor

One way to help yourself is to have your own health and safety advisor. You can delegate all health and safety responsibilities to this third-party person. Your safety advisor will educate you on what you need to do to keep your business safe.

If an accident does occur on-site, and the company has all health and safety requirements up to date, the safety advisor will deal with HSE for you.

A safety advisor can save you time and money for a basic monthly fee.

Request a chat and find out more about our safety advisor service